Security company reporting: the weekly and monthly reports an owner should read

Weekly and monthly reports for a security company owner: payroll cost by client, receivables and TDS, SSF and TDS deposits, overtime, coverage and incidents.

  • StrataMax team
  • 9 min read
  • 7 sources
On this page

Figures in this article are checked as of 15 November 2026. Rules change with each budget and gazette notice, so confirm current rates with the IRD, SSF or your tax adviser before you rely on them.

A security company owner needs two sets of reports. Every week: uncovered shifts, missed patrol visits, open incidents by severity, flagged attendance and overdue receivables, because these can still be fixed this month. Every month: payroll cost and margin by client, overtime, receivables with TDS withheld, SSF, TDS and VAT deposits due, incidents by severity, and equipment not returned. Together they answer the three questions that matter: are the posts covered, is each client profitable, and is the company up to date with its legal deposits.

Reports are also how you prove the service to clients. But a report is only as good as the records under it, so this guide covers what each report should show, how to work out the figures, and how to build a routine so the reports are actually read.

Why does a security company need a reporting routine?

A guard company’s problems are spread across many posts and many people. A post left uncovered at night, a client paying 90 days late, a supervisor approving overtime nobody checked, an SSF deposit missed: each is small on its own and invisible from the office unless someone looks.

A reporting routine does three things:

  • Catches problems while they can be fixed. An uncovered shift found on Monday can be staffed by Tuesday. Found at month end, it becomes a client complaint and a billing dispute.
  • Shows which clients make money. Contract rates are set once a year, but costs change every month with overtime, revisions and staff turnover.
  • Keeps legal deposits on time. SSF, TDS and VAT all fall due within 25 days after the month ends, and late deposits cost interest.

Which reports should an owner read every week?

Weekly reports are operational. Keep them short: one page, exceptions only.

Report What it shows Question it answers
Uncovered shifts Shifts scheduled with no check-in, by post Which posts were unguarded, and for how long?
Flagged and manual attendance Check-ins outside the site area, and attendance entered by the office or a supervisor Is attendance trustworthy at every post?
Missed patrol visits Scheduled versus completed visits, by post and officer, with reasons Are supervisors actually visiting?
Open incidents Incidents open or investigating, by severity and age Is anything serious being left to drift?
Overdue receivables Clients past their payment terms, with amounts Who needs a call this week?

Each line should have a name next to it: the operations manager owns coverage and patrols, accounts owns receivables. The meeting is about decisions, not about reading the figures aloud.

For the detail behind the patrol report, see our guide to running patrol visits across many posts.

Which reports should an owner read every month?

Monthly reports are financial and legal, plus a summary of the weekly ones.

Report What it shows
Payroll cost and margin by client Invoice value against the cost of the guards on that client’s posts
Overtime by client and post Overtime hours and amount, against the Labour Act limits
Receivables ageing What each client owes, by age, with TDS withheld shown separately
Statutory deposits SSF, salary TDS and VAT for the month, with due dates and deposit status
Incidents by severity and type Count of incidents per client and severity, open and closed
Coverage summary Shifts scheduled versus covered, by client
Equipment outstanding Kit issued and not returned, especially by guards who have left
Head count Guards assigned versus guards billed, by client

How do you work out payroll cost and margin by client?

This is the report most owners do not have, and the one that tells you which contracts to renegotiate. For each client, add up the cost of the guards on its posts for the month and compare it with the invoice value before VAT.

Example: a client with a three-guard post, all on the minimum wage of NPR 19,550 a month (12,170 basic plus 7,380 dearness allowance). The invoice value before VAT for the month is NPR 90,000.00.

Line Calculation NPR
Gross pay 3 × 19,550 58,650.00
Employer SSF at 20% of basic 3 × (12,170 × 20%) = 3 × 2,434.00 7,302.00
Overtime paid this month From payroll 9,000.00
Dashain allowance provision 3 × (12,170 ÷ 12) = 36,510 ÷ 12 3,042.50
Total cost 58,650.00 + 7,302.00 + 9,000.00 + 3,042.50 77,994.50
Invoice value before VAT 90,000.00
Gross margin 90,000.00 − 77,994.50 12,005.50
Margin % 12,005.50 ÷ 90,000.00 13.34%

The Dashain allowance provision spreads the festival allowance of one month’s basic a year (Labour Act s.37) across the twelve months, so the month when it is paid does not make every client look unprofitable. The 20% employer SSF is on basic remuneration, not gross. This margin is before office staff, supervisors, uniforms, transport and other overheads, so it has to be large enough to cover those.

Run this for every client and sort by margin. Clients near the bottom are where overtime, unbilled extra guards or an old contract rate are eating the profit. Our guide on pricing a security guard contract covers building the rate in the first place.

What should the receivables report show?

Most clients withhold TDS when they pay you. For a VAT-registered security company the rate is 1.5% whether the payment is treated as a service fee (Income Tax Act s.88) or a contract payment above NPR 50,000 (s.89). A company that is not VAT-registered may face 15% under s.88. If the receivables report shows only cash received, every client will look short by the TDS amount.

Example for the same client, with TDS on the value before VAT:

Line Calculation NPR
Invoice value before VAT 90,000.00
VAT at 13% 90,000.00 × 13% 11,700.00
Invoice total 90,000.00 + 11,700.00 1,01,700.00
TDS at 1.5% 90,000.00 × 1.5% 1,350.00
Cash expected 1,01,700.00 − 1,350.00 1,00,350.00

Check: 1,00,350.00 + 1,350.00 = 1,01,700.00.

A useful receivables report has these columns for each client: invoice total, cash received, TDS withheld, TDS certificate received (yes or no), balance, and age (0 to 30, 31 to 60, 61 to 90, over 90 days). The TDS certificate column matters because tax withheld is only useful to you once it has been deposited against your PAN. Whether TDS is calculated on the value before or after VAT is not settled in the texts we checked, so agree the base with each client. Our guide to TDS on security and manpower service payments covers the rates, the VAT base question and reconciliation.

Which statutory deposits should be on the monthly report?

Put every deposit, its due date and its status on one line each. All three main deposits fall within 25 days after the end of the Nepali month.

Deposit Due Legal basis Cost of being late
SSF contributions (11% employee + 20% employer, on basic) Within 25 days after the end of the month Contribution Based Social Security Act 2074 s.4(4), as amended in 2082 10% interest on the contribution (s.9(1))
Salary TDS, deposit and e-TDS statement Within 25 days after the end of the Nepali month Income Tax Act s.90(1) to (2) Interest at 15% a year (s.119(1)); late statement fee of 2.5% a year (s.117(3))
VAT return and payment Within 25 days after the tax period VAT Act s.18(1), s.19(1) Not covered here; confirm with your accountant

The SSF deadline was 15 days before the 2082 amendment; older guides still say 15. Since 2082, if SSF contributions are late and a worker is hurt or dies in that period, the employer must pay the benefit the SSF would have paid (s.9(6)). That makes the SSF line the one to watch most closely.

How should overtime be reported?

Report overtime hours and amount by client and by post, and flag any guard over the Labour Act limits of 4 hours a day or 24 hours a week (s.30(1)). Rising overtime at one post usually means a vacancy covered by double shifts. That costs more than hiring, tires the guard, and may breach the limits. Check also that the overtime rate set for each shift meets the Labour Act, which sets overtime pay at 1.5 times the basic remuneration for regular hours (s.31(1)).

How should incidents and equipment be reported?

Incidents: a monthly count by client, type and severity (low, medium, high, critical), with how many are still open and the oldest open one. Low incidents usually go into the client’s monthly summary; high and critical ones should already have been reported to the client at the time. What each incident record should contain is covered in our guide to incident reporting for security companies.

Equipment: a list of kit issued but not returned, sorted by value, with a separate list for guards who have left. Kit held by leavers is the easiest loss to prevent and the hardest to recover later.

What do clients want in their monthly report?

A client report is a subset of yours. Keep it factual and consistent from month to month.

Section Contents
Coverage Shifts scheduled and covered for each post
Guards Who was posted, and any replacements
Patrol visits Visits completed and missed, main findings
Incidents Count by severity; summary of each high or critical one and its status
Open items Site defects reported to the client, not yet fixed

Leave out internal matters: pay, disciplinary decisions, your margins. Use real counts, including missed visits and uncovered shifts. A client who later finds a gap you hid will doubt every report after it.

How do you build a reporting routine that lasts?

Reports that nobody reads stop being produced. A few rules keep the routine alive:

  1. Fix the calendar. Weekly operations review on the same day each week. Monthly review after payroll is approved and invoices are sent, and before the 25-day deposit deadline.
  2. One owner per report. Operations for coverage, patrols and incidents; accounts for margins, receivables and deposits; stores for equipment.
  3. Exceptions first. Lead each report with what is wrong, not with totals.
  4. Same format every time. Comparing this month with last month is only possible if the columns do not change.
  5. Record the decisions. Each review ends with a short list of actions and names. Start the next review by checking them.
  6. Produce reports from the records, not by retyping. A report typed from other sheets adds its own errors and is out of date by the time it is read.

Checklist: a security company reporting routine

  • Weekly: uncovered shifts by post.
  • Weekly: flagged and manual attendance entries.
  • Weekly: missed patrol visits with reasons.
  • Weekly: open incidents by severity and age.
  • Weekly: overdue receivables with an owner for each call.
  • Monthly: payroll cost and gross margin by client, including employer SSF and a Dashain allowance provision.
  • Monthly: overtime by client and post, checked against 4 hours a day and 24 a week.
  • Monthly: receivables ageing with TDS withheld and TDS certificates tracked.
  • Monthly: SSF, TDS and VAT deposits with due dates and status, done within 25 days.
  • Monthly: incidents by client, type and severity.
  • Monthly: equipment issued and not returned, leavers first.
  • Monthly: guards assigned versus guards billed, by client.
  • Client reports use real counts, including misses.
  • Every review ends with written actions and names.

Where StrataMax fits

StrataMax keeps the records these reports draw on in one place: payroll batches with SSF, TDS, overtime, Dashain allowance and approvals; IRD-approved VAT invoices, receipts that record TDS withheld, and sales registers; attendance from the Android app; patrol visits with findings and photos; incidents with severity and follow-ups; and equipment issue and return per guard. Book a demo to see it with your own clients and posts.

Frequently asked questions

What reports should a security company owner look at every week?

Each week: uncovered shifts and posts, missed patrol visits, open incidents by severity, flagged or manual attendance entries, and overdue client receivables. These are the things that can still be fixed before month end.

What reports should a security company owner look at every month?

Each month: payroll cost and gross margin by client, overtime by client and post, receivables ageing with TDS withheld, SSF, TDS and VAT deposits due, incidents by severity and type, and equipment issued but not returned.

When are SSF and TDS deposits due in Nepal?

SSF contributions must be deposited within 25 days after the end of each month under the Contribution Based Social Security Act s.4(4) as amended in 2082. Salary TDS must be deposited and the withholding statement filed within 25 days after the end of each Nepali month under Income Tax Act s.90.

How do you calculate gross margin per client for a security company?

Take the month's invoice value before VAT for that client and subtract the guards' gross pay, employer SSF, overtime and a monthly provision for the Dashain allowance for the guards on that client's posts. Divide what is left by the invoice value to get the margin percentage.

Sources

  1. Contribution Based Social Security Act 2074, s.4 (consolidated text)
  2. Contribution Based Social Security Act 2074, s.9 (consolidated text)
  3. Social Security Fund: amount to be deposited in the fund (contribution rates)
  4. IRD: Income Tax Act 2058, as amended by the Finance Act 2082
  5. IRD: TDS rates on payments, FY 2083/084
  6. IRD: VAT Act 2052, as amended by the Finance Act 2082
  7. Labour Act 2074, Nepal Law Commission English translation (FAOLEX mirror)

Next step

Let StrataMax do this every month

Payroll with SSF and TDS, IRD-approved billing and every guard and post on one record. Book a 30-minute walkthrough.