GPS attendance for security guards: how location-checked check-in works and where it falls short

How GPS check-in against a site area works for guards, its accuracy limits, guards without smartphones, privacy and consent, overtime, payroll and handling disputes.

  • StrataMax team
  • 9 min read
  • 2 sources
On this page

Figures in this article are checked as of 15 November 2026. Rules change with each budget and gazette notice, so confirm current rates with the IRD, SSF or your tax adviser before you rely on them.

A GPS attendance system for security guards works like this: each post has a site area (a geofence) drawn around it, and when a guard checks in or out on a mobile app, the phone’s location at that moment is compared with the area. Inside the area, the check-in is accepted with its time and location. Outside, it is flagged for a supervisor to review. The result is an attendance record that shows not just that a guard said they were on duty, but where the phone was when they said it.

It is a strong check, not a perfect one. Phone location can be poor indoors, some guards will not have a suitable phone, and a guard who hands their phone to a colleague can still beat it. This guide covers how location-checked attendance works, its limits, guards without smartphones, privacy and consent, how the data feeds payroll and overtime, and a written policy for disputes.

Why do security companies check attendance by location?

In a guard company, attendance is not just an HR record. It decides what each guard is paid, and it is the evidence that a post was covered when the client asks.

The usual paper and phone methods have known weak points:

Method Weak point
Paper register at the post Signed later or by someone else; nobody at the office sees it until month end
Supervisor’s daily sheet Records what the supervisor was told, not what they saw
Phone call to the control room No record of where the caller was; hard to audit later
Spreadsheet at the office Typed from the above; adds its own errors

Location-checked check-in closes the most common gap: a guard being marked present at a post they were not at. It does this at the moment of check-in, and the record carries the time and location, so a dispute months later can be answered from the record rather than from memory.

How does check-in against a site area work?

The steps are simple:

  1. The office sets up the post with its location and a site area around it, and assigns the guard to the post and shift.
  2. The guard opens the app at the start of the shift and taps check-in.
  3. The phone reads its location and the app compares it with the post’s site area.
  4. The check-in is saved with the time and the location. If the guard was outside the area, it is flagged.
  5. At the end of the shift the guard checks out the same way.
  6. The office sees the attendance for each post and shift, and supervisors review anything flagged.

How big should the site area be?

Draw it around where guards actually stand, not just the building outline. For a gate post that means the gate, the guard room and the approach. For a large site such as a factory or hospital, include all the posts where a guard may start a shift.

An area that is too tight produces false flags every day, and supervisors start ignoring them. An area that is too large lets a guard check in from the tea shop across the road. Start generous, look at where the flagged check-ins actually are in the first two weeks, and adjust.

How accurate is phone GPS, and what goes wrong?

Phone location is good enough for most gate and perimeter posts, but it varies with the place and the phone. Expect problems in these cases:

Situation What happens What to do
Indoor posts (reception, lobby) Location jumps or is far off Draw a wider area; let the guard check in at the entrance
Basements and car parks Very poor or no fix Check in at ground level before going down
Narrow streets between tall buildings Location drifts to a neighbouring street Widen the area along the street
Old or low-cost phones Slow or rough fix Wait a few seconds outdoors; replace phones that fail regularly
Location turned off, or permission refused App cannot check location Supervisor follows up the same shift
Mock-location apps on some phones Location can be faked Treat flags and patterns seriously; spot-check with patrol visits

Two points follow. First, a check-in outside the area is a reason to check, not proof of absence. Second, a check-in inside the area proves where the phone was, not who was holding it. One guard checking in on behalf of an absent colleague is still possible. That is why patrol visits matter alongside attendance: a patrol officer who arrives and finds a different guard on duty catches what location alone cannot. See our guide to patrol visits across many posts.

What about guards without smartphones?

In most guard companies some guards will not have a suitable Android phone, or will have one that is often out of charge or data. Plan for this before rollout, not after.

Options, in rough order of preference:

  1. Supervisor records on the guard’s behalf, with a reason, during a visit or by call. The entry is marked as manual.
  2. A shared phone at the post for check-in, used only for that post. This proves the post was staffed, but not which guard; combine it with patrol checks.
  3. Paper register at that post only, entered by the office. Use this as a last resort and keep it to named posts.

Whatever you choose, count manual entries every week by post and supervisor. A small, stable number is normal. A rising number means the fallback is replacing the system.

Guards will ask whether the company is following them. Answer clearly and in writing.

  • Say what is collected. For check-in attendance, that is the location at check-in and check-out, with the time, post and shift.
  • Say what it is for. Confirming the guard was at the assigned post, calculating hours, and settling disputes.
  • Say what it is not for. If your system only reads location at check-in and check-out, say so plainly. Do not let guards believe they are tracked all day, and do not track them all day without telling them.
  • Get acknowledgement. Include a short location and attendance notice in the appointment letter or a signed acknowledgement. The phone itself will also ask the guard to allow location for the app.
  • Limit who sees it. Supervisors need their posts’ attendance; most office staff do not need location details.
  • Set retention. Keep location with the attendance record, for as long as the attendance record is kept, and no longer.

Attendance supports payroll, and payroll supports your salary expense. The Income Tax Act s.81(2) requires supporting documents to be kept for 5 years after the income year, so agree with your accountant whether your attendance records fall under that and set your retention period to match.

In StrataMax, the privacy policy states that the Android app records latitude and longitude at check-in and check-out, uses them to validate attendance against the post’s area, does not use location for tracking outside attendance events, and does not use it for advertising.

How does location-checked attendance feed payroll and overtime?

Once check-in and check-out are reliable, they give the hours each guard worked on each shift. Those hours drive three parts of payroll:

  • Days worked and absence, which affect basic and allowances.
  • Overtime, the hours beyond normal working hours.
  • Holiday work, which counts as overtime unless substitute leave is given.

The Labour Act 2074 rules to check against the attendance data:

Rule Labour Act 2074
Normal hours: up to 8 a day and 48 a week s.28(1)
Rest: half an hour after 5 continuous hours; in continuous work rest is given in turns and counts as working time s.28(2) to (4)
No forced overtime, except where not working would endanger life, safety or health or cause serious loss s.29
Overtime limit: 4 hours a day and 24 hours a week s.30(1)
Work on a weekly or public holiday without substitute leave counts as overtime s.30(2)
Overtime pay: 1.5 times the basic remuneration for regular hours s.31(1)
Substitute leave within 21 days for continuous-operation work on a holiday s.42

Worked example: a 12-hour shift

A guard works the 06:00 to 18:00 shift, six shifts a week, at a factory gate. Normal hours are 8 a day, so each shift has 4 hours of overtime: exactly the daily limit. Six shifts give 6 × 4 = 24 overtime hours a week: exactly the weekly limit. Any extra shift that week, or a late check-out, takes the guard over the limit. Attendance data that shows hours per shift lets you see this before payroll, not after.

Now suppose the guard was rostered for 26 shifts in the month and the overtime rate set for the shift is NPR 110 an hour (an illustrative figure; check your own rate against s.31(1)).

Line Calculation Result
Rostered shifts 26
Overtime hours if all shifts worked 26 × 4 104 hours
Overtime pay if all shifts worked 104 × 110 NPR 11,440.00
Shifts flagged outside the area 3
Flags cleared by supervisor (guard was at the post) 2
Shift not confirmed (guard not found at post) 1
Shifts paid 26 − 1 25
Overtime hours paid 25 × 4 100 hours
Overtime pay 100 × 110 NPR 11,000.00

The NPR 440.00 difference is one unconfirmed shift’s overtime. The basic pay effect of the absence is handled separately under your absence rules. Our guide on overtime calculation in Nepal covers the rate and hourly divisor in detail.

What should a dispute policy say?

Disputes will happen: a guard says they were at the post, the app says they were not, or the check-out is missing because the battery died. Write the rules down before the first one.

Situation Rule
Check-in outside the area Supervisor reviews within a set time (for example 48 hours); confirms or rejects with a reason
Missing check-in or check-out Guard reports it the same day; supervisor confirms from a visit, call or client contact
Guard disputes a rejected shift Guard raises it before payroll closes; operations manager decides; decision recorded
Repeated flags at one post Check the site area and phone before blaming the guard
Repeated flags for one guard at different posts Talk to the guard; check the phone; consider patrol spot checks
Any change to attendance after the fact Record who changed it, when and why; never overwrite silently

Two principles keep the policy fair. Every rejection has a recorded reason. And the review finishes before payroll is approved, so guards are not paid wrongly and then chased for recovery.

Checklist: rolling out GPS attendance for guards

  • Every post has a correct location and a site area drawn around where guards stand.
  • Every guard is assigned to a post and shift before using the app.
  • Indoor and basement posts have a defined check-in point.
  • A written fallback exists for guards without a working smartphone.
  • Manual entries are counted weekly by post and supervisor.
  • Guards receive a written notice of what location data is collected and why.
  • Access to location details is limited to those who need it.
  • A retention period for attendance records is set with your accountant.
  • Overtime from attendance is checked against 4 hours a day and 24 hours a week.
  • The overtime rate for each shift is checked against the Labour Act.
  • Flagged check-ins are reviewed before payroll closes, with reasons recorded.
  • Patrol visits spot-check that the right guard is on duty.

How StrataMax handles attendance

In StrataMax, guards use the Android mobile app to see their assignments, check in and out, request leave and get notifications. At check-in and check-out the app checks the phone’s location against the post’s site area, and the office sees the attendance for each post. Attendance feeds payroll, where overtime is paid at the rate set for the shift alongside SSF, TDS and payslips. For a broader view of moving guards and posts onto one system, see how to digitise a security company.

Frequently asked questions

How does GPS attendance work for security guards?

Each post has a site area drawn around it. When the guard checks in or out on a mobile app, the phone's location at that moment is compared with the area. If it is inside, the check-in is accepted with the time and location; if not, it is flagged for review.

Does GPS attendance track guards all day?

It does not have to. A location-checked attendance system can record the location only at check-in and check-out. StrataMax works this way: location is used to verify attendance at the post, not to follow the guard through the shift, and it is not used for advertising.

What if a guard does not have a smartphone?

Decide a fallback in writing, for example the supervisor records the guard's attendance with a reason, and review those manual entries every week. Keep the exception small, or the paper register simply moves into the app.

How accurate is GPS check-in?

Phone location is usually good enough outdoors at a gate or perimeter, but it gets worse indoors, in basements, between tall buildings and on cheap or old phones. Draw site areas generously around where guards actually stand, and treat a location outside the area as a reason to check, not as automatic proof of absence.

How does GPS attendance affect payroll and overtime?

Check-in and check-out times give the hours worked per shift, which drive basic pay deductions for absence and overtime. Overtime should be checked against the Labour Act limits of 4 hours a day and 24 hours a week, and paid at the overtime rate set for the shift.

Sources

  1. Labour Act 2074, Nepal Law Commission English translation (FAOLEX mirror)
  2. IRD: Income Tax Act 2058, as amended by the Finance Act 2082

Next step

Let StrataMax do this every month

Payroll with SSF and TDS, IRD-approved billing and every guard and post on one record. Book a 30-minute walkthrough.